As a pvc waterstop manufacturer, Xinxirang can provide waterstop solution. Water stop products to solve all water stop.

PVC waterstop strip welding tool - hot melting knife 1

PVC waterstop strip welding tool - hot melting knife 2

PVC waterstop strip welding tool - hot melting knife 3

PVC waterstop strip welding tool - hot melting knife 4

PVC waterstop strip welding tool - hot melting knife

Inquiry

Write a Review

Product description

Instructions for Use of Heater Blade:

I . The instructions for use in the case of having a clamp are as follows

1.The Heater Blade is used mainly for welding PVC waterstop strips.

2.Cut flat PVC waterstop strip interfaces and put them together into a clamp (Note: The welding surface of a PVC waterstop strip shall be more prominent by 1CM than the clamp to facilitate melting in welding).

3. After being connected to a 220V power supply and heated for three minutes, put the electric knife into a clamp mounted with waterstop strips, stay for about 40 seconds, take out the electric knife, and close the clamp to make the two interfaces of the PvC waterstop strip fused for about one minute.

Product parameter

● The FDA Extraction Toxicity Tests with 21 CFR 175.300. British Standards BS 2782:320A test results

Stan dardcom pliance
BS 2782:320A	Hong Kong General Specification for Civil Engineering Works clause 16.80
U.S.Corps of Engineers CRD-C572-74	China GB/T 1040-1992
Properties
Form	Extruded thermoplastic sections
Colour	Blue
Solid content	100%
Density	1409kg/m3
Hardness	78.0IRHD
Tensile strength	14 N/mm2
Elongation at bleak point	300%
Toxicity	non-toxic1

The instructions for use in the circumstance that there is no clamp are as follows.

PVC waterstop strip welding tool - hot melting knife 7

The electric knife is mainly used for welding PVC waterstop strips.

Trim PVC waterstop strip interfaces and set them aside.

After being connected to a 220V power supply and heated for three minutes, put the electric knife into the waterstop strips that have been cut flat for hot melting, stay for about 40 seconds, take out the electric knife, and close the clamp to make the two interfaces of the PVC waterstop strips fused for approximately one minute.

FAQ

What is the Waterstop WS0843E used for?

The Waterstop WS0843E is used to prevent water infiltration in concrete structures such as basements, tunnels, and reservoirs.

How is the Waterstop WS0843E installed?

The Waterstop WS0843E is typically installed by embedding it into the concrete joints during the construction phase.

What are the dimensions of the Waterstop WS0843E?

The Waterstop WS0843E has a width of 8 inches and a height of 4 inches, with a standard length of 20 feet.

Can the Waterstop WS0843E be used in both horizontal and vertical applications?

Yes, the Waterstop WS0843E can be used in both horizontal and vertical concrete joints to effectively stop water infiltration.

Is the Waterstop WS0843E compatible with various types of concrete?

Yes, the Waterstop WS0843E is compatible with most common types of concrete, including regular concrete, shotcrete, and precast concrete.

How long does the Waterstop WS0843E last once installed?

The Waterstop WS0843E is designed to have a long lifespan and can effectively prevent water infiltration for many years, even in harsh environmental conditions.

Get in touch with us

just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs